How Mini PCs Workadmin
In the 1940s, the University of Pennsylvania built the Electronic Numerical Integrator and Computer, better known as ENIAC. It was one of the earliest electronic, general-purpose computers and it was a monster. It weighed in at around 30 tons (27.2 metric tons), with half a million hardwired connections and thousands of vacuum tubes forming the circuits [source: Avery].
Skip ahead a few decades to the 1970s and the birth of the personal computer. Years of hard work on the part of computer engineers allowed us to harness the power of a computer from a home desk. Those early personal computers were primitive by today’s standards — the earliest could only store information on external disks or magnetic tape.
In the 1980s, we saw the first laptop computers hit store shelves. These weren’t the sleek, portable computers we’re used to lugging around today. They were clunky, heavy and had limited functionality. Over time, these devices would become more powerful and yet lighter and less cumbersome.
Today, you can carry a smartphone with more computing power than ENIAC. Even desktop PCs have shrunk over the years. While you can still find tower PCs designed for high-end applications, many computers are only slightly larger than a cell phone. And you can even find computers in the form factor of a USB thumb drive.
In this article, we’ll take a look at little computers that are a big deal. These devices may be the size of a circuit board or even smaller. How can engineers pack a full computer on something so small?
The Big Deal About Getting Smaller
To understand how a PC can fit onto something as small as a USB stick, we need to look at the history of miniaturization in the computer industry. One of the most important developments for computers — and electronics in general — happened in a lab in 1947.
That’s when John Bardeen, William Shockley and Walter Brattain created the first transistor. They worked for Bell Laboratories and had been experimenting with germanium crystals, an early semiconductor material in use near the end of World War II. Brattain wrapped a thin strip of gold around the point of a triangular piece of plastic, leaving a gap right at the tip of the point. He suspended the plastic triangle so that it just barely made contact with the germanium crystal.
Brattain discovered that if he applied a voltage to one side of the gold strip, it would come out the other side as an amplified current. Although this early transistor wasn’t a practical component for electronic devices, it paved the way to replacing the vacuum tube. Because vacuum tubes are large and give off a lot of heat, this opened up new opportunities for computer designs.
Over the course of several years, engineers refined the design of the transistor. Eventually, they were able to miniaturize transistors so that they could fit on a small chip of semiconductor material — which in some ways acts as a conductor and in other ways as an insulator.
Then, in 1965, a man named Gordon Moore made an observation that would become something of a self-fulfilling prophecy. He noted that within the span of a certain amount of time — depending on whom you ask and when, the period ranges between 18 and 24 months — improvements in technology and manufacturing processes permit the number of discrete components on a square inch (6.5 square centimeters) of silicon wafer to double. He saw that companies that designed chips would find new ways to create smaller components and then optimize the manufacturing process so that it made more sense financially to build more powerful chips. Today, we call this observation Moore’s Law.
One way to interpret Moore’s Law is to say that computer processors double in processing power every 18 months or so. Another way is to say that at the end of any 18-month span of time, engineers will discover ways to cram twice as many transistors onto a silicon wafer as they did when they started. Yet another way is to say that the size of discrete components on processors gets dramatically smaller every 18 months.
This means that not only are our computers getting more powerful — far more powerful than the building-sized monsters from the early days of computing — but they’re also getting smaller. And if you’re willing to sacrifice a few features for the sake of size, you can get very small indeed.
The Anatomy of a Mini PC
There are certain features every computer needs in order to work. First, computers need power. The very basis of computing is in channeling electrons to flow through circuits. We rely on power cables and batteries for normal PCs. But a mini PC may not have an onboard battery or a place to plug in a power cord. Instead, it may draw power through a USB connection. The USB interface allows for the transfer of data and power. If the mini PC is in the form of a USB stick, plugging the computer into a powered display or USB hub could provide the power the computer requires to operate.
A computer needs a processor. The processor’s job is to take data and to perform operations upon data to get a result. That result could be anything from displaying an image on a screen to simulating complex physics. Modern processors can have multiple cores, meaning the processor can work on more than one set of operations at a time. With certain types of computer problems, this decreases processing times. Many mini PCs rely on advanced reduced-instruction-set computer microprocessor (ARM)-based processors — which tend to be small and energy efficient, giving off less heat than more powerful processors.
A computer also needs memory to store data. The processor can call upon data stored within memory and perform operations on it. There are two major categories of memory. Read-only memory (ROM) is unalterable and nonvolatile. That means you can’t change what’s stored in ROM and the information doesn’t go away even if the computer loses power. The ROM in a computer typically stores system-level programs like basic input/output system (BIOS), which provides the set of instructions a computer needs to boot.
The other type of memory a computer relies upon is called random-access memory (RAM). A computer’s RAM stores data by applying small electric charges to a series of memory cells. The information within RAM only exists as long as the processor needs it — RAM can be repurposed according to the needs of the processor.
The mini PC also needs some storage medium that can hold information like the computer’s operating system. Flash memory — nonvolatile memory that comes in the form of an integrated circuit — takes up little space and has no moving parts.
To do more than a narrow set of tasks, a computer needs an operating system. The operating system’s job is to act as a platform for other programs and to allocate the computer’s physical resources to those programs.
Finally, the PC needs some sort of physical interface that allows you to connect it to other devices such as displays, keyboards and other peripherals. Some mini PCs rely on USB connections. Others may incorporate standards like HDMI. Through these ports, the computer can communicate with other devices. Some have multiple ports — one version of the Raspberry Pi computer has two USB ports, an Ethernet port, RCA-video out, an audio jack and HDMI port.
What You Won’t Find
To cram an entire computer onto a circuit board or in a thumb drive, you have to give up a few features. One of those is a cooling system. A circuit board or thumb drive can’t accommodate a fan or a water-cooling rig. And that can be a problem — computing generates heat. That’s because computing relies upon electricity and our methods of harnessing electricity aren’t perfect. We always lose some energy in the form of heat — wires and connections heat up as electricity flows through them. With too much heat, a system can break down — pathways expand, connections break and the computer stops working.
That’s one reason most of these computers use ARM-based processors. An ARM-based processor is ideal for small, mobile devices. They’re small and efficient. They may not measure up to the processing speeds of a state-of-the-art CPU, but they can still pack a data-crunching punch.
Many of these small PCs also lack a real-time clock (RTC). The RTC is the timekeeping device on your computer that keeps going even after you power down. That’s why your computer’s clock keeps time whether the entire computer is on or not. The RTC pulls power from a dedicated battery. But while engineers have reduced the size of components like memory and processors, battery technology hasn’t kept pace. A battery would add more bulk and heat to the system, and so a mini PC may not include one.
Perhaps the most obvious missing elements of a mini PC are the physical interfaces we rely upon to input and receive data from a computer. This includes a display and interface like a keyboard, mouse, track pad or touch screen. Some mini PCs support the Bluetooth standard, allowing you to use Bluetooth peripherals. Otherwise, you may need a USB hub to connect your accessories to a mini PC.